Powering
Trusted Identities
FARGO® DTC®ii Plus
User Guide
Output Hopper Card
Capacity
100 cards (.030”/.762.mm)
Reject Hopper Card
Capacity
100 cards (.030”/.762.mm)
Card cleaning roller integrated into the ribbon cartridge.
A new cleaning roller is included with each ribbon cartridge.
Windows Server 2003
Windows Server 2008
Windows Server 2016
Windows Server 2019
Windows 7 (32- and 64 bit)
Windows 10 (32- and 64-bit)
Ethernet with internal print server
65° F to 90° F / 18° C to 32°C
9.8”H x 22.9”W x 9.2”D/249mm H x 583mm W x 234mm D
Printer – Three years; Printhead – Three years, unlimited pass with UltraCard™
Encoding Options
Supported
13.56 MHz (iCLASS®, MIFARE, ISO 14443 A/B, ISO 15693) read/write encoder
Contact Smart Card Encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards
(T=0, T=1) as well as synchronous cards
ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
1.5
Functional specifications
This card printer utilizes two different, yet closely related printing technologies to achieve its remarkable direct-to-card print
quality for dye-sublimation and resin thermal transfer.
1.6
Printer components: print ribbons
The card printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images directly onto blank cards.
Since the dye-sublimation and the resin thermal transfer print methods each provide their own unique benefits, print ribbons are
available in resin-only, dye-sublimation-only and combination dye-sublimation/resin versions.
To make it easier to identify the print ribbons, a letter code has been developed to indicate the type of ribbon panels found on
each ribbon:
= Dye-Sublimation Yellow Panel
To Next Page
Loading...
