HID FARGO DTC ii Plus - Safety Messages - United States

Powering
Trusted Identities
FARGO® DTC®ii Plus
User Guide
PLT-05151, A.0.R
12
August 2020
1.3 Safety messages
1.3.1 Safety messages - United States
Symbol
Critical instructions for safety purposes
Danger:
Failure to follow these guidelines results in personal injury or death. To prevent
personal injury or death:
◼ Reference the following safety messages before performing an operation.
◼ Always remove the power cord prior to performing repair procedures, unless otherwise specified.
◼ Ensure only qualified personnel perform these procedures.
ESD:
This device is electrostatically sensitive. You may damage the device if exposing it to static electricity discharges.
To prevent damage:
◼ Reference the following safety messages before performing an operation.
◼ Observe all established Electrostatic Discharge (ESD) procedures while handling cables in or near the circuit
board and printhead assemblies.
◼ Always wear an appropriate personal grounding device.
◼ Always remove the ribbon and cards from the printer before making any repairs, unless otherwise
specified.
◼ Remove jewelry and thoroughly clean hands before working on the printer.
Caution:
This symbol warns of an electrical hazard that could result in personal injury or death.
Caution:
For safety purposes, do not use Ethernet for a direct connection outside of the building.