September 2017 39
PLT-03159, Rev A.0 Printer Preferences
4.1.1.10 Advanced Settings Tab
Use the Advanced Settings tab to adjust the internal printer settings, which are customized for
every printer at the factory and saved directly within the printer memory.
Note: Select Restore Defaults to restore the internal default settings.
You can change the values for firmware settings by clicking the fields in the Current column.
Field Description
Setting Column Displays label for the setting. See the following Setting Column Fields table.
Default Column Displays default value for setting
Current Column Displays current value for setting
Apply Applies changed values.
Restore Defaults Restores the default values.
Enable Mag Verify Select the check box to verify that the data is written to the tracks correctly.
To Next Page
Loading...
