HID FARGO DTC1500XE - Chapter 6 Firmware Upgrades; 6.1 Upgrade Information

Chapter 6
September 2017 71
Firmware Upgrades
6.1 Upgrade Information
To upgrade the printer’s firmware, perform the following steps:
1. Run the Fargo Workbench Printer Utility.
2. If running Fargo Workbench Version 3 or greater:
a. Select the Update Manager Workbench Utility.
b. Select the printer(s) to update.
c. Click Select Firmware file… option to locate or enter this latest firmware file
(e.g. FRW-00373_DTCnnnn_vn.n.n.n.frm).
d. Browse for the firmware file or enter the firmware file name and click Open.
e. Click Begin Updating Firmware to send the file to the printer(s).
3. If running a Fargo Workbench release prior to Version 3:
a. Select the Application Menu at the upper left, and select Upgrade Firmware.
b. Enter the firmware file name or click Browse to find and select this latest firmware file
(e.g. FRW-00373_DTCnnnn_vn.n.n.n.frm).
c. Click OK to send the file to the printer(s).
4. Restart the printer if it does not restart automatically.