September 2017 19
PLT-03159, Rev A.0 Setup and Installation Procedures
2.3 Installing the Print Ribbon Cartridge
Fargo Direct-to-Card printers require highly specialized supplies to function properly.
To maximize printer durability, reliability, and printed card quality, you must use only Fargo-certified
supplies. Your Fargo warranty is void, where not prohibited by law, if you use supplies other than
Fargo-certified supplies.
Printer cleaning is recommended with each ribbon change to ensure quality printed cards.
Resin-only print ribbons consist of a continuous roll of a single resin color. No protective overlay
panel (O) is provided because resin images do not require the protection of an overlay.
1. Pull open the drawer.
2. Insert the print ribbon cartridge into the printer drawer.
3. Close the drawer.
For additional help with loading the print ribbon cartridge, see the Fargo Printers videos available at
www.youtube.com/HIDGlobal.
To Next Page
Loading...
