Linux(Fedora,Red Hat,SuSE) Driver Support
To configure HighPoint RAID Management Software to work with rr26xx driver, you
should setup /etc/hptcfg to be the driver name:
#echo rr26xx > /etc/hptcfg
Please refer to HighPoint RAID Management Software documents for more
information.
7 - Uninstalling
You can only uninstall the driver when your system is not booting from devices
attached to RR26xx controller. Just remove the lines you added to /etc/fstab, and
remove the file files you created in the /etc/init.d.
6-16
To Next Page
Loading...
