6
Note: Please make sure all disks are clean before you insert them
into the slot to avoid unexpected situations.
Step 6. Refasten the screw to secure the SSD.
Repeat Steps 4 to 6 to install the remaining SSDs.
Note:
Make sure the SSDs are carefully, but securely installed into
each M.2 port. Loose connections can cause a variety of stability
and performance issues, and may ultimately result in data loss.
The following example shows four SSDs installed into Port 1, 2, 3
& 4;
Step 7. Replace the front panel after installing all SSDs.
To Next Page
Loading...
Need help?
General
