Need help?Do you have a question about the HighPoint SSD7202 and is the answer not in the manual?
General| Brand | HighPoint |
|---|---|
| Model | SSD7202 |
| Category | Computer Hardware |
| Language | English |
Remove the four screws securing the heat sink to the PCB on the rear of the SSD7202.
Carefully remove the heat sink and prepare the thermal pad by removing the protective blue film.
Use the provided screws to install the NVMe drive into the slot.
Remove the screws located on the right side of the SSD7202.
Gently insert the NVMe SSD into the designated slot.
Refasten the screw to securely install the NVMe SSD.
To Next Page
