Need help?Do you have a question about the HighPoint SSD7103 and is the answer not in the manual?
General| PCI Express slots version | 3.0 |
|---|---|
| Supported storage drive interfaces | M.2 |
| RAID levels | 0, 1 |
| Certification | CE, FCC, RoHS, REACH, WEEE |
| Data transfer rate | 14 Gbit/s |
| S.M.A.R.T. support | Yes |
| Number of devices supported | 4 |
| Mean time between failures (MTBF) | 920585 h |
| Linux operating systems supported | Kernel 3.12 |
| Server operating systems supported | Windows Server 2016 |
| Windows operating systems supported | Windows 10 |
| Storage temperature (T-T) | -20 - 80 °C |
| Operating temperature (T-T) | 5 - 55 °C |
Weight and Dimensions| Depth | 17 mm |
|---|---|
| Width | 211 mm |
| Height | 111.2 mm |
| Weight | 620 g |
Guide to changing UEFI settings on a SuperMicro motherboard for RAID configuration.
Troubleshooting guide for 'No supported controller detected' error in UEFI environment.
Syntax and examples for creating RAID arrays (RAID0, RAID1) using commands.
Syntax and examples for deleting RAID arrays using commands.
Syntax for displaying physical device and logical list information.
Syntax for quitting the RAID creation utility application.
Syntax for accessing help messages within the utility.
To Next Page
