11
g. After loading the driver, return to the “Where do you want to install Windows?”
interface. The previous Legacy disks will now be recognized as a RAID array:
h. After partitioning, continue and complete the Windows installation procedure.
Step 5 - Disabling Hibernation
a. After Windows is installed, boot into the operating system and disable
Hibernation. Hibernation fails when the system is installed on an NVMe
RAID array; this bug will slow down or prevent startup and disable sleep
mode.
If you do not turn the hibernation functionality off, you may experience the
following problems：
a) Shutdown time is extended by an additional 3-5 minutes.
b) You cannot shut down properly; you need to manually press the power
switch button of the motherboard to power off the system.
To Next Page
Loading...
