5
reattach these drives after the operating system has been
successfully installed.
Important: The SSD7202 only supports UEFI boot. If you
have other PCIe adapters/controllers installed, you must make
sure the SSD7202 controller’s is loaded first. Otherwise, you
may be unable to boot up your system. Please visit the
SSD7202 Resources and FAQ pages for more information.
Data RAID Prerequisites
Data arrays are used exclusively for storage – they cannot be used to
boot a system.
1. You must have at least one NVMe SSD installed into the
SSD7202 controller.
2. The SSD7202 must be installed into a PCIe 3.0 slot with x8
or x16 lanes.
3. Windows 10 / Windows 2016 / Windows 2019 or a Linux
Distribution with Kernel 3.10 and later
To Next Page
Loading...
