13
2. Verify the SSD7101A-1 Status
The Manage Tab will display the status of the installed SSD7101A-1.
The Virtual Disk is listed under Logic Device Information. The
individual M.2 SSDs are listed under Physical Device Information.
3. Manage the RAID disk
The SSD7101A-1 only supports one RAID disk, and NVMe Manager will
automatically configure this RAID disk after the software has been
installed. If you need to add another M.2 SSD, you must first delete the
existing RAID disk, and then re-create a new RAID disk using all of the
M.2 SSDs.
To Next Page
Loading...
Need help?
General
