HighPoint SSD7000 Series Quick Installation Guide

4
SSD7505 Hardware Installation:
Step 1. On the rear of the SSD7505, remove the six screws that secure
the unit’s heat sink to the PCB.
After removing the screws, carefully remove the heat sink from the
SSD7505.
Step 2. These 4 screws are used to install the NVMe SSD’s.
Step 3. Please remove the screws on the right side of SSD7505
Step 4. Gently insert the SSD into the slot.

HighPoint SSD7000 Series Specifications

General

Brand	HighPoint
Model	SSD7000 Series
Category	Computer Hardware
Language	English