6
Note
：
Make sure the aluminum cover is properly aligned with the
controller board (PCB), and that it makes full contact with the thermal
pad, before refastening it to the SSD7505. If the cover is improperly
installed, the fan and thermal pad will be unable to sufficiently cool the
NVMe SSD’s and controller componentry, which may result in damage
to the SSD’s or controller hardware, performance loss, unstable I/O,
and the loss of data.
Note: Please be sure to connect NVMe before using the product to
reduce the occurrence of unnecessary errors!
Note: Install the driver in the system first and then install the board
!
Resources
A variety of manuals, guides and FAQ’s are available for the SSD7505
RAID controller.
In addition, we recommend visiting the Software Downloads webpage
for the latest drivers, management interfaces, and installation guides.
To Next Page
Loading...
Need help?
General
