HighPoint SSD7180 - Page 19

HighPoint NVMe G5 Data RAID Installation Guide (Linux)
19
02. apt-get update
03. Reinstall the driver.
For Proxmox
When installing the driver, due to various factors, driver files such as gcc and make cannot be compiled,
thus interrupting the driver installation process:
This problem can be caused by
：
a. The system is not connected to a network (internet connection)
Solution：
01. Double check the system’s internet connection
02. Once confirmed, reinstall the driver.
b. System process is occupied/busy
Solution
：
Open the system terminal with root privileges and enter the following command:
apt-get update
This will prompt the system to release the process and update the download source. Install the driver
again after the system process has been released.
If you are using a completely new system, the following error occurs when installing the driver or