HighPoint SSD7180 - Page 6

HighPoint NVMe G5 Data RAID Installation Guide (Linux)
6
UEFI BIOS Settings
The following is a list of supported UEFI NVMe products.
Supported Controller
SSD7105
SSD7202
SSD7502
SSD7505
SSD7540
SSD7580A
SSD7580B
SSD7749M
SSD7749E
Supported Enclosure
SSD6780A
Note: Products that do not support UEFI can skip this section.
Different motherboards will provide different UEFI-related BIOS settings. Please consult your motherboard’s
user manual for more information. This section provides examples using a SuperMicro H12SSL-i
motherboard.
1. Boot the system and access the motherboard BIOS menu.
2. Under "Advanced->PCIe/PCI/PnP Configuration->, change “CPU Slot x PCI-E OPROM" to
"EFI". “x” represents the PCIE slot assignment. For this example, the SSD7505 is installed into
“CPU Slot 1”.
3. Set "Secure Boot" to "Disabled".