HighPoint SSD7540 - Step 3 Flash UEFI Rom to SSD7540; Step 4 Create Array

6
Step 6. Gently insert the SSD into the slot.
Note: Please make sure all disks are clean before you insert them
into the slot to avoid unexpected situations.
Step 7. Refasten the screw to secure the SSD.
Repeat Steps 5 to 7 to install the remaining SSDs.
The following example shows eight Gen4 SSDs installed into Ports 1-8:
Step 8. After installing all SSDs, carefully flip the heatsink to the right.
Port
Port
Port
Port
Port
Port
Port
Port