HighPoint SSD7540 - Page 13

SSD7540 Linux CentOS8.2 Installation Guide
- 11 -
c. The driver installation is complete. Reboot to enter the system where the new kernel
is located.
Appendix(A(
Support'command:'
help/info/quit/exit/creat e/delete.'
! Create'Command'
Syntax'
Create%Array%Type%(RAID0/RAID1/RAID10)%Member%Disk%list%
(1/1,1/2|*)Capacity(100|*)%
!
Examples%
<<<%create%RAID0%
<<<%create%RAID0%*% %
<<<%create%RAID0%*%*%
%%%%Create%RAID0%array% with%al l% disks%and%with%maximum%capacity.%
%
<<<%create%RAID1%1/1,%1/3%10%
%%%%Create%RAID1%array%w ith%disk%1/1%and%1/3%and%wit h%10GB%
capacity.%
%
<<<%create%RAID10%
<<<%create%RAID10%*% %
<<<%create%RAID10%*%*%
%%%%Create%RAID10%array%w ith%al l%disks%and%with%maximum%
capacity.%
!
! Delete'Command'
Syntax'
!!delete%{array%ID}%
!
Examples'
<<<%delete%1%
%%%%Delete%the%first%array%from%Logical%device%list.%
<<<%delete%2%
%%%%Delete%the%second%array%from%Logical%device%list.%