HighPoint SSD7540 - Page 4

SSD7540 Linux CentOS8.2 Installation Guide
- 2 -
b. Set "Advanced->PCIe/PCI/PnP Configuration->CPUSlot PCI-E OPROM" to "EFI".
If the SSD7540 has been connected to the motherboard CPU1Slot2 PCI-E X16，
you should set "CPU1Slot2 PCI-E X16 OPROM" to "EFI"；
c. Disable "Secure Boot", set " Secure Boot " to "Disabled"。
2. Set UEFI setting with ASUS PRIME X299 -DELUXE motherboard as an example
a. Set " Boot->CSM->Boot from Storage Devices" to "UEFI driver first";