Hikmicro HABROK 4K Series - Auto Screen off

Multi-Spectrum Binocular User Manual
10
Auto Power Off
You can set the auto power off time for your device.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select , and press to enter the
configuration interface.
4. Press or to select the auto power off time as required, and
press to confirm.
5. Hold to save and exit.
Note

See the battery icon for the battery status. means the battery is
fully charged, means that the battery is low, and means the
battery charging is abnormal.

When the low power note shows, charge the battery.

The auto power off takes effect only when you don’t operate the device
and the device isn’t connected with HIKMICRO Sight app at the same
time.

The auto power off countdown will start again when the device reenters
standby mode, or the device is restarted.
2.6 Auto Screen Off
Auto screen off function darkens the screen to save energy and increase
battery time.
Steps
1. Enable auto screen off.
1) Press to show the menu.
2) Go to Advanced Settings, and press or to select
.
3) Press to enable auto screen off.
4) Hold to save settings and exit.
2. Enter standby mode.