Multi-Spectrum Binocular User Manual
11
You can do one of the following methods to enter the standby mode when
the display is turned on:
Tilt the device downwards from 70° to 90°.
Rotate the device horizontally from 75° to 90°.
Keep the device still and do not move it for 5 minutes.
3.
Wake up device.
You can do one of the following methods to wake up the device when the
display is turned off:
Tilt the device downwards from 0° to 60° or upwards from 0° to 90°.
Rotate the device horizontally from 0° to 70°.
Press to wake up the device.
Note
After enabling the auto screen off, when you enter the menu, the auto
screen off does not take effect until you exit the menu.
2.7
Menu Description
In the live view interface, press to show the menu.
Figure 2-10 Menu Description
Press to move the cursor up.
Press to move the cursor down.
Press to confirm and hold it to exit the menu.
To Next Page
Loading...