Multi-Spectrum Binocular User Manual
24
Figure 3-6 Correct Defective Pixel
Note
The selected defective pixel can be magnified and displayed on the
bottom right of the interface.
If the screen OSD blocks the defective pixel, move the cursor to reach
the defective pixel, then the device performs mirror display
automatically.
3.13
Set Infrared Light
The infrared light helps to view targets clearly in dark environment. The
infrared light only works in night mode, auto mode or when the
environment is dark. In other modes, the infrared light does not take effect.
Steps
1.
Press to show the menu.
2.
Press or to select and press to confirm.
3.
Press or to select the light level or set smart IR.
Note
The image might be overexposed when the environment is too bright. The
smart IR function adjusts the overexposed images by controlling infrared
light intensity, so as to improve the image effect in night mode and dark
environment.
4.
Hold to save settings and exit.
To Next Page
Loading...