Hikmicro HABROK 4K Series - App Connection; Firmware Status; Check Firmware Status

Multi-Spectrum Binocular User Manual
12
2.8 App Connection
Connect the device to the HIKMICRO Sight app via hotspot, then you can
capture picture, record video, or configure parameters on your phone.
Steps
1. Search the HIKMICRO Sight on App Store (iOS System) or Google Play™
(Android System) to download it, or scan the QR code to download and
install the app.
Android System
iOS System
2. Press to show the menu.
3. Go to Advanced Settings, and press or to select .
4. Press to enter the setting interface.
5. Press or to select Hotspot. The hotspot function is enabled.
6. Turn on the WLAN of your phone and connect to the hotspot.
 Hotspot Name: HIKMICRO_Serial No.
 Hotspot Password: Go to Hotspot in the menu to check the
password.
7. Open the app and connect your phone with the device. You can view the
interface of device on your phone.
Note

The device cannot connect to the app if you enter wrong password
several times. Refer to Restore Device to reset the device, and connect
the app again.

If the password is not displayed, please upgrade the device to the latest
version. Or enter the serial No. as the password.
2.9 Firmware Status
2.9.1 Check Firmware Status
Steps