Multi-Spectrum Binocular User Manual
13
1. Open the HIKMICRO Sight and connect your device to the app.
2. Check if there is an upgrade prompt on the device management
interface. If there is no upgrade prompt, the firmware is the latest
version. Otherwise, the firmware is not the latest version.
Figure 2-11 Check Firmware Status
3. (Optional) If the firmware is not the latest version, upgrade the device.
See
Upgrade Device.
2.9.2 Upgrade Device
Upgrade Device via HIKMICRO Sight
Steps
1. Open HIKMICRO Sight app and connect your device to the app.
2. Tap the upgrade prompt to enter the firmware upgrade interface.
3. Tap Upgrade to start upgrade.
Note
The upgrading operation may vary due to app updates. Please take the
actual app version for reference.
Upgrade Device via PC
Before You Start
Please get the upgrade package first.
Steps
Connect the device to your PC with cable.
2.
Open the detected disk, copy the upgrade file and paste it to the root
directory of the device.
3. Disconnect the device from your PC.
4. Reboot the device, and the device upgrades automatically. The
upgrading process will be displayed in the main interface.
To Next Page
Loading...