49
2. Drag the slider to enable UPnP.
3. Optional: Select the mapping type as Manual and set the HTTP port and the service port.
4. Click Save to complete the settings
FTP
You can configure the FTP server to save alarm video.
Steps
1. Click Communication → FTP to enter the page.
2. Configure the FTP parameters
FTP Type
Set the FTP type as preferred or alternated.
FTP Protocol
FTP and SFTP are selectable. The files uploading is encrypted by using SFTP protocol.
Server and Port
The FTP server address and corresponding port.
User Name and Password
The FTP user should have the permission to upload pictures. If the FTP server supports
picture uploading by anonymous users, you can check Anonymous to hide your device
information during uploading.
Directory Structure
The saving path of snapshots in the FTP server.
To Next Page
Loading...
Need help?
General
