HIKVISION AX PRO User Manual

17
Step1 Create a site (Only for HPP)
Download the Hik-Partner Pro and login with the installer account.
A site is the place where the alarm system deployed. Create a site where the device can be added
to with it’s site name and address. The owner of the site would be an end user, usually regarded as
administrator.
Step2 Configure the Network on APP
1. Download Hik-Connect/Hik-Partner Pro and log in.
2. Power on the AX PRO.
3. Connect your phone to your home Wi-Fi. Make sure that this Wi-Fi can access the Internet
normally and the signal is stable.
4. Open the HC or HPP, click +, and select Scan QR Code.
Figure 3-3. Scan QR Code
5. Scan the QR code on the back of the control panel and wait for the result.
Figure 3-4. QR Code
Figure 3-5. Result
6. Tap Next.

HIKVISION AX PRO Specifications

General

Brand	HIKVISION
Model	AX PRO
Category	Security System
Language	English