HIKVISION AX PRO User Manual

119
Chapter 6 General Operations
6.1 Arming
You can use keypad, keyfob, Tag, client software, mobile client to arm your system.
After the arming command is sending to AX PRO, the system will check the detector status. If the
detector is in fault, you will need to choose whether to arm the system with fault.
While the system is armed, the AX PRO will prompt the result in 5s, and upload the arming report.
Arming
Access level of Arming
The user in level 2 or 3 has the permission to arm or partly arm the system.
Arming Indication
The arming/disarming indicator keeps solid blue for 5s.
Reason of Arming Failure
● Intrusion detector triggered (excepts the detector on the exit route).
● Panic alarm device triggered.
● Tampering alarm occurred.
● Communication exception

HIKVISION AX PRO Specifications

General

Two-Way Wireless Communication	Yes
Maximum Number of Wireless Repeaters	4
Maximum Number of IP Cameras	4
Voice Prompt	Yes
Tag Reader	Yes
Mobile App	Hik-Connect
Type	Wireless Alarm System
Network	Ethernet, Wi-Fi
Backup Battery	Yes
Onboard Siren	Yes
Operating Temperature	-10 °C to 50 °C
Compatibility	Hikvision