EasyManua.ls Logo

HIKVISION DS-PWA96-DB-WE - User Manual

HIKVISION DS-PWA96-DB-WE
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AX PRO
User Manual

Table of Contents

Questions and Answers

  • J
    Jacob LinSep 4, 2025
    Why am I unable to send mails to Yahoo from my HIKVISION Security System?
    • M
      Matthew MartinezSep 4, 2025
      If you cannot send emails to Yahoo, the security level of your mailbox might be too high. Go to your mail account settings and enable 'less secure sign-in'.
  • A
    Ashley McphersonSep 18, 2025
    What to do if the alarm clearing operation on the HIKVISION Security System panel does not produce the alarm clearing report?
    • M
      Manuel LangSep 18, 2025
      If there is no alarm, no report will be uploaded for arm clearing.
  • J
    Jennifer WalkerSep 16, 2025
    What to do if the HIKVISION DS-PWA96-DB-WE failed to send test mail?
    • J
      Joseph DavisSep 16, 2025
      If the test mail fails to send, review and correct the mailbox configuration information as shown in table 1/1.
  • S
    Shawn CalderonSep 14, 2025
    What to do if HIKVISION DS-PWA96-DB-WE zone triggered/fault?
    • D
      David TuckerSep 14, 2025
      Reset the detector.
  • M
    Michael ClarkeSep 12, 2025
    What causes failure in arming HIKVISION DS-PWA96-DB-WE Security System?
    • J
      Jessica GravesSep 12, 2025
      Arming may fail if the panel doesn't enable 'forced arming' and there's a fault in the zone. To fix this, either turn on 'forced arming' or restore the zone to its normal status.
  • S
    scott98Sep 12, 2025
    What to do if HIKVISION DS-PWA96-DB-WE zone is tamper-proof?
    • D
      Dana GreenSep 12, 2025
      Ensure the tamper-proof button of the detector is held down.
  • E
    Emily KruegerSep 9, 2025
    What to do if my HIKVISION DS-PWA96-DB-WE failed to send mail during use?
    • B
      barbara72Sep 9, 2025
      If the system fails to send mail, it could be that the mailbox server has restricted access. Log in to your mailbox to check if it is locked.
  • J
    Jennifer JacksonSep 7, 2025
    Why am I unable to enter registration mode on my HIKVISION DS-PWA96-DB-WE?
    • C
      Craig CrossSep 7, 2025
      If you can't enter registration mode, it might be because the panel is in 'Hotspot' mode. Switch the panel to 'station' mode and try again.
  • M
    Maria LoweSep 5, 2025
    What to do if HIKVISION DS-PWA96-DB-WE Security System zone is offline?
    • C
      Connie HollandSep 6, 2025
      If a zone is offline, it's likely because the detector reports undervoltage. Replace the detector battery to resolve this.
  • S
    Shawn AdamsAug 20, 2025
    How to fix HIKVISION DS-PWA96-DB-WE IP conflict?
    • C
      carriewilliamsAug 21, 2025
      To resolve an IP conflict, first, find the currently available IP address using the ping command. Then, change the IP address and log in again.

HIKVISION DS-PWA96-DB-WE Specifications

General IconGeneral
ModelDS-PWA96-DB-WE
CategorySecurity System
Wireless Zones96
Wireless Keyfobs32
Wireless Repeaters8
PIRCAM SupportYes
Onboard CameraNo
Wi-FiYes
EthernetYes
Mobile AppHik-Connect
Battery BackupYes
Working Humidity10% to 90% (Non-Condensing)
MaterialPlastic
TypeWireless
Wired Zones2
CommunicationWi-Fi, Ethernet, 4G
ProtocolsTCP/IP
Working Temperature-10°C to 55°C

Related product manuals