80
You can view the device, area, zone and so on status on the overview page.
Figure 5-14. Web Main Page
5.3.1 User Management
The administrator and the installers can manage users. If you are the administrator, you can add,
edit, and delete users, and assign different permissions to the newly-added users.
Click User Management to enter the page.
Note
There are three types of users for the AX PRO, including administrator (or owner), operator, and
installer (or setter). Different types of users have different permissions for accessing the
functionality of the AX PRO.
Add User
Steps
1. Click User Management to enter the page.
2. Click +Add.
3. Configure the user parameters in the pop-up window on the right.
Disposable User
-Permanent: Permanent use. Configurable with full user permission.
-One-Time User: Expired after arming or disarming once, or automatically expires after 24
hours. No duress code permission. No keyfobs and tags permission.
Duress Code
After entering the duress code, the system will upload the duress alarm to the alarm
receiving center. No audible or visual alarm.
4. Click Save to add the user.
To Next Page
Loading...
Need help?
General
