73
can set the notification push parameters.
Steps
1. In the site, tap the AX PRO and then log in to the device (if required).
2. Tap → Communication Parameters→ Push Notification(s) to enter the page.
3. Enable the target notification.
Zone Alarm
The device will push notifications when the zone alarm is triggered or the zone lid opened is
triggered or restored.
Note
You need to set event filtering interval time for phone calling.
Zone Alarm
The device will push notifications when the zone alarm (on web client, software client or
mobile client) is triggered or the zone peripherals alarm is triggered or restored.
Peripherals Lid Opened
The device will push notifications when lid opened alarm of any peripheral is triggered or
restored.
Panel Lid Opened
The device will push notifications when lid opened alarm of the control panel is triggered or
restored.
Keypad/Keyfob/APP Panic Alarm
The device will push notifications when panic alarm on keypads/keyfobs/APP is triggered or
restored.
Keypad/Keyfob Medical Alarm
The device will push notifications when medical alarm on keypads or keyfobs is triggered.
Keypad Fire Alarm
The device will push notifications when fire alarm on keypads is triggered or a user presses
the fire alarm key on the keypad.
Panel Status (Power and Battery)
The device will push notifications when the control panel power/battery status is changed.
Panel Status (Communication)
The device will push notifications when the control panel communication status is changed.
Zone Status
The device will push notifications when any zone status is changed.
Peripherals Status
The device will push notifications when any peripheral status is changed.
Panel Operation
The device will push notifications when the user operate the control panel.
To Next Page
Loading...
Need help?
General
