User Manual of Network Camera
124
11.7 Maintenance
11.7.1 Rebooting the Camera
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click Reboot to reboot the network camera.
Figure 11-12 Reboot the Device
11.7.2 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click Restore or Default to restore the default settings.
Figure 11-13 Restore Default Settings
Note:
After restoring the default settings, the IP address is also restored to the
default IP address, please be careful for this action.
11.7.3 Exporting / Importing Configuration File
Purpose:
To Next Page
Loading...
