DS-1200KI/1006KI Keyboard User Manual
19
Keyboard Operation
This section describes how to control devices using the keyboard.
On the keyboard, Press the MODE button on the panel to enter the operation for different devices.
DS-1200KI keyboards support the following 9 operation modes, while DS-1006KI keyboards
support mode 4, 5, and 6.
See the following table for the description of each keyboard mode.
Description of Keyboard Mode
The keyboard can be used for managing the devices (including
the IPC, IP dome, DVR/NVR, MVC, decoder, video wall controller,
etc.) for control. The keyboard can add the devices via Web
browser and assign each of them the unique device ID, and finally
manage to communicate with and realize the video wall or PTZ
control through the device ID+command operation.
The keyboard can connect with the matrix access gateway, and
realize the video wall control, PTZ control, etc.
The keyboard can connect with the DVR/NVR and remotely call
the device menu and realize PTZ control through the virtual
panel.
The keyboard can connect with the matrix access gateway via RS-
422 serial port, and realize the video wall control, PTZ control,
etc.
The keyboard can connect with the DVR/NVR via RS-485 serial
port, and remotely call the device menu and realize PTZ control
through the virtual panel.
The keyboard can connect with the analog dome or PTZ unit via
RS-485 serial port, and realize PTZ control; or connect to analog
matrix via RS-232 port.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
