EasyManuals Logo

HIKVISION DS-2CD1023G0-IU User Manual

HIKVISION DS-2CD1023G0-IU
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Network Bullet Camera·Quick Start Guide
15
2 Installation
Before you start:
Make sure the device in the package is in good condition and all
the assembly parts are included.
The standard power supply is 12VDC, please make sure your
power supply matches with your camera.
Make sure all the related equipment is power-off during the
installation.
Check the specification of the products for the installation
environment.
Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
Memory Card Installation
Only type V camera supports memory card installation, you can
follow the steps to mount and unmount the memory card.
Steps:
1. Loosen the screws to remove the memory card slot cover.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD1023G0-IU and is the answer not in the manual?

HIKVISION DS-2CD1023G0-IU Specifications

General IconGeneral
TypeIP security camera
Placement supported-
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
BluetoothNo
Number of users32 user(s)
Networking standardsIEEE 802.3af
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, IGMP, QoS, UDP
Ethernet LAN (RJ-45) ports1
Form factorBullet
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP66
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Pan range0 - 360 °
Tilt angle range0 - 180 °
Angle of rotation360 °
Camera shutter speed1 - 1/100000 s
Minimum illumination0.028 lx
Sensor typeCMOS
Optical sensor size1/2.7 \
DC output voltage12
Power source typeDC, PoE
Power consumption (max)3.6 W
Power consumption (Power over Ethernet (PoE))4 W
Fixed focal length2.8 mm
Maximum aperture number2
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Video compression formatsH.264, H.265, M-JPEG
Noise reduction technology3D noise reduction
Weight and Dimensions IconWeight and Dimensions
Depth66.2 mm
Width67.8 mm
Height177.6 mm
Weight270 g
Package depth121 mm
Package width216 mm
Package height118 mm
Package weight470 g

Related product manuals