Need help?Do you have a question about the HIKVISION DS-2CD7153-E and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | - |
| Day/night mode | Yes |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Product color | White |
| Protection features | Vandal proof |
| International Protection (IP) code | IP66 |
| Total megapixels | 2 MP |
| Maximum resolution | 1600 x 1200 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264, M-JPEG, MPEG4 |
| Supported graphics resolutions | 1280 x 960, 1280 x 720 (HD 720), 1600 x 1200 (UXGA) |
| Pan range | -15 - 15 ° |
| Tilt angle range | 0 - 90 ° |
| Angle of rotation | 15 ° |
| Camera shutter speed | 1/25 - 1/100000 s |
| Minimum illumination | 0.1 lx |
| Field of view (FOV) angle | 68 ° |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Optical zoom | - x |
| Focus adjustment | 1.8 |
| Fixed focal length | 2.8 mm |
| Password protection type | User |
| Wi-Fi | No |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1x, Qos (SIP, SRTP |
| Ethernet LAN (RJ-45) ports | 1 |
| DC output voltage | +12V |
| Power source type | PoE |
| Power consumption (max) | 4 W |
Weight and Dimensions| Depth | 97.5 mm |
|---|---|
| Width | 99.9 mm |
| Height | 46.5 mm |
| Weight | 250 g |
Details FCC compliance requirements and operating conditions for the device.
States compliance with applicable harmonized European standards and directives.
Details live view, screen layouts, and auxiliary monitor functions.
Explains HDD connectivity, capacity, and group management features.
Covers various recording modes, schedules, and playback functions.
Details methods for backing up recorded files to external devices.
Explains how the DVR detects and responds to alarms and system exceptions.
Outlines supported network protocols and connectivity configurations.
Describes the status indicators, IR receiver, and USB ports on the front panel.
Explains the functions of each button on the IR remote control.
Details how to use a USB mouse for navigation and control.
Details the various input/output ports located on the rear panel.
Provides step-by-step procedures for safe startup and shutdown.
Walks through essential settings like date, time, and network via a setup wizard.
Explains the process of discovering and adding network cameras to the system.
Covers modifying IP camera parameters and configuring custom protocols.
Introduces the live view screen and its status icons.
Explains single-screen, multi-screen, and auto-switch modes.
Details mouse actions for navigation and control within live view.
Covers configuring output interfaces, dwell times, and camera display order.
Details setting up PTZ parameters before camera control.
Explains setting up and recalling specific camera positions and movements.
Covers setting stream types, resolution, and quality for recording.
Explains how to define schedules for automatic recording.
Details configuring motion detection triggers for recording.
Introduces the general process and methods for playing back recordings.
Details various methods for backing up recorded video files.
Explains how to configure motion detection zones, sensitivity, and triggers.
Details basic network settings like IP address, gateway, and DNS.
Guides on preparing new HDDs for use by the DVR.
Guides on upgrading the DVR firmware using various methods.
Explains how to reset the DVR to its original factory configuration.
To Next Page
