User Manual of Digital Video Recorder
140
10.7 Detecting Bad Sector
Purpose:
You can detect the bad sector of the HDD to check the status of the HDD.
Steps:
1. Enter the HDD Detect interface.
Menu>HDD>HDD Detect
Figure 10. 21 Bad Sector Detection
2. Click the Bad Sector Detection tab to enter the interface.
3. Select a HDD and click the Detect button to start detecting.
Figure 10. 22 Bad Sector Detecting
4. You can click the Pause button to pause the detection and click the Resume button to resume the
detection.
5. If there is error information about the HDD, you can click the Error Info button to view the information.
To Next Page
Loading...
