User Manual of Digital Video Recorder
107
8.5 Handling Exceptions
Purpose:
Exception settings refer to the handling method of various exceptions, e.g.
• HDD Full: The HDD is full.
• HDD Error: Writing HDD error, unformatted HDD, etc.
• Network Disconnected: Disconnected network cable.
• IP Conflicted: Duplicated IP address.
• Illegal Login: Incorrect user ID or password.
• Input/Recording Resolution Mismatch: The input resolution is smaller than the recording resolution.
• Record Exception: No space for saving recorded files.
Steps:
1. Enter Exceptions interface and handle various exceptions.
Menu> Configuration> Exceptions
Figure 8. 11 Exception Settings Interface
2. Check the checkbox of Enable Event Hint to display the (Event/Exception icon) when an
exceptional event occurs. And click the icon to select the detailed event hint for display.
Note: Click the icon appears in the live view interface, and you can view the detailed information of
the exceptional event. Click the button Set, and then you can select the detailed event hint for display.
Figure 8. 12 Detailed Event
3. Set the alarm linkage actions. For details, see Chapter 8.7 Setting Alarm Response Actions.
4. Click Apply to save the settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
