To Next PageTo Next Page
Need help?Do you have a question about the HIKVISION DS-2CD7A26G0P-IZHS and is the answer not in the manual?
General| Model | DS-2CD7A26G0P-IZHS |
|---|---|
| Image Sensor | 1/1.8" Progressive Scan CMOS |
| WDR | 120 dB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Ingress Protection | IP67 |
| Max Resolution | 1920 x 1080 |
| Lens | 2.8 to 12 mm, motorized lens |
| IR Range | Up to 30 meters |
| Power Supply | PoE (802.3af), 12V DC |
| Type | Network Bullet Camera |
Ensures good conductivity for all ground paths and proper fastener installation.
Ensures outlets are properly wired, can be checked with an electrical outlet tester.
Mandatory use of a surge suppressor meeting specific UL 1449 VPR, joule, and clamping voltage requirements.
Specifies ideal vertical and horizontal angles for optimal license plate capture.
Specifies optimal height (16-50px) and width (100-200px) for license plate recognition.
Configures the license plate detection region using yellow lines in the camera's Web GUI.
Ensures captured license plates are within a ±5 degrees tilt angle for recognition.
Displays captured license plates and associated data in real-time via the LPR Result tab.
Search and download captured license plate images by file type, date, and time.
