HIKVISION DS-2CD7153-E

User Manual of Digital Video Recorder
7
 Customization of tags, searching and playing back by tags;
 Locking and unlocking of record files;
 Local redundant recording;
 Searching and playing back record files by camera number, recording type, start time, end time, etc.;
 Smart playback to go through less effective information;
 Zooming in for any area when playback;
 Reverse playback of multi-channel;
 Supports pause, fast forward, slow forward, skip forward, and skip backward when playback, locating
by dragging the mouse on the progress bar;
 Up to 16-ch synchronous playback at 1080P;
Backup
 Export data by a USB, SATA or eSATA device;
 Export video clips when playback;
 Management and maintenance of backup devices;
Alarm and Exception
 Configurable arming time of alarm input/output;
 Alarm for video loss, motion detection, video tampering, abnormal signal, video input/recording
resolution mismatch, illegal login, network disconnected, IP confliction, record exception, HDD error,
and HDD full, etc.;
 Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and
alarm output;
 Automatic restore when system is abnormal;
Other Local Functions
 Manual and automatic video quality diagnostics;
 Users can operate by mouse and remote control;
 Three-level user management; admin user can create many operating account and define their
operating permission, which includes the permission to access any channel;
 Completeness of operation, alarm, exceptions and log writing and searching;
 Manually triggering and clearing alarms;
 Importing and exporting of configuration file of devices;
 Getting cameras type information automatically;
Network Functions
 1 self-adaptive 10M/100M/1000M network interfaces and various working modes are configurable:
multi-address, load balance, network fault tolerance, etc.; and 1 self-adaptive 10M/100M/1000M
network interface for other models;
 IPv6 is supported;
 TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP™ and
HTTPS are supported;
 TCP, UDP and RTP for unicast;
 Auto/Manual port mapping by UPnP
TM
;
 Remote search, playback, download, locking and unlocking the record files, and downloading files
broken transfer resume;
 Remote parameters setup; remote import/export of device parameters;
 Remote viewing of the device status, system logs and alarm status;