Need help?Do you have a question about the HIKVISION DS-2CD1023G0-IU and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Placement supported | - |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Bluetooth | No |
| Number of users | 32 user(s) |
| Networking standards | IEEE 802.3af |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, IGMP, QoS, UDP |
| Ethernet LAN (RJ-45) ports | 1 |
| Form factor | Bullet |
| Mounting type | Ceiling/wall |
| Product color | Black, White |
| Housing material | Metal, Plastic |
| International Protection (IP) code | IP66 |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 30 m |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 180 ° |
| Angle of rotation | 360 ° |
| Camera shutter speed | 1 - 1/100000 s |
| Minimum illumination | 0.028 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/2.7 \ |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Power consumption (max) | 3.6 W |
| Power consumption (Power over Ethernet (PoE)) | 4 W |
| Fixed focal length | 2.8 mm |
| Maximum aperture number | 2 |
| Operating temperature (T-T) | -30 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | H.264, H.265, M-JPEG |
| Noise reduction technology | 3D noise reduction |
Weight and Dimensions| Depth | 66.2 mm |
|---|---|
| Width | 67.8 mm |
| Height | 177.6 mm |
| Weight | 270 g |
| Package depth | 121 mm |
| Package width | 216 mm |
| Package height | 118 mm |
| Package weight | 470 g |
Details about FCC compliance and potential radio frequency interference.
Explains CE marking and compliance with EU directives like WEEE and battery.
Distinguishes between warnings for serious injury/death and cautions for damage.
Steps for mounting and unmounting the memory card.
Detailed steps for installing the camera on a ceiling.
Procedures for mounting the camera using a junction box.
Guidance on using waterproof accessories for outdoor cable protection.
Instructions on connecting the network camera to a LAN.
Guides users through the camera activation process by setting a password.
Detailed steps for activating the camera using a web browser interface.
Instructions for activating the camera using the SADP software tool.
Procedure for changing the camera's IP address for LAN access.
Steps to enable the Hik-Connect service on the camera for remote access.
Guide to activating Hik-Connect service using the SADP software.
Instructions for enabling Hik-Connect service through the web browser interface.
Steps for downloading, installing, and registering for the Hik-Connect mobile app.
Process of adding the camera to a Hik-Connect account.
How to check and initialize the memory card for recording.
To Next Page