EasyManuals Logo

HIKVISION DS-2CD1023G0-IU User Manual

HIKVISION DS-2CD1023G0-IU
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Network Bullet Camera·Quick Start Guide
6
the restrictions applied to the location and about any
precautions that shall be taken.
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region. Please
refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 12 VDC according
to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as
adapter overload may cause over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power
socket. When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then please contact
the service center.
Cautions
Make sure the power supply voltage is correct before using the
camera.
Do not drop the camera or subject it to physical shock.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD1023G0-IU and is the answer not in the manual?

HIKVISION DS-2CD1023G0-IU Specifications

General IconGeneral
TypeIP security camera
Placement supported-
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
BluetoothNo
Number of users32 user(s)
Networking standardsIEEE 802.3af
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, IGMP, QoS, UDP
Ethernet LAN (RJ-45) ports1
Form factorBullet
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP66
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Pan range0 - 360 °
Tilt angle range0 - 180 °
Angle of rotation360 °
Camera shutter speed1 - 1/100000 s
Minimum illumination0.028 lx
Sensor typeCMOS
Optical sensor size1/2.7 \
DC output voltage12
Power source typeDC, PoE
Power consumption (max)3.6 W
Power consumption (Power over Ethernet (PoE))4 W
Fixed focal length2.8 mm
Maximum aperture number2
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Video compression formatsH.264, H.265, M-JPEG
Noise reduction technology3D noise reduction
Weight and Dimensions IconWeight and Dimensions
Depth66.2 mm
Width67.8 mm
Height177.6 mm
Weight270 g
Package depth121 mm
Package width216 mm
Package height118 mm
Package weight470 g

Related product manuals