HIKVISION DS-2CD2722FWD-IS - 2.1 Preparation and Disassembly

Network Dome Camera·Quick Start Guide
19
19
Preparation
Purpose:
Before mounting, you have to disassemble the camera and install the
memory card first.
2.1.1 Disassembling
Steps:
1. Loosen the three screws on the edge of the bubble with the screw
driver.
2. Lift and put aside the bubble.
3. Remove the inner black liner.
Black Liner
Bubble
Screws
Remove the Bubble and Black Liner (Type I Camera)