Network Camera User Manual
123
detailed steps.
5. Click Linkage Method to select the linkage methods for scene change, including
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS, Trigger
Recording and Trigger Alarm Output.
6. Click Save to save the settings.
10.2.2 Configuring Intrusion Detection
Purpose:
Intrusion detection function detects people, vehicle or other objects that enter and
loiter in a pre-defined virtual region, and some certain actions can be taken when
the alarm is triggered.
Note: Intrusion detection function varies according to different camera models.
Steps:
1. Enter the Intrusion Detection settings interface, Configuration> Event > Smart
Event > Intrusion Detection.
Intrusion Detection
2. Check the checkbox of Enable to enable the function.
To Next Page
Loading...
Need help?
General
