HIKVISION DS-2CD2786G2-IZS User Manual

Network Camera User Manual
122
etc.
10.2.1 Configuring Scene Change Detection
Purpose:
Scene change detection function detects the change of surveillance environment
affected by the external factors, such as the intentional rotation of the camera.
Some certain actions can be taken when the alarm is triggered.
Note: Scene change detection function varies according to different camera models.
Steps:
1. Enter the Scene Change Detection settings interface, Configuration > Event >
Smart Event > Scene Change Detection.
Scene Change Detection
2. Check the checkbox of Enable to enable the function.
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4. Click Arming Schedule to set the arming schedule. Refer to Task 2 Set the Arming
Schedule for Motion Detection in 10.1.1 Configuring Motion Detection for

HIKVISION DS-2CD2786G2-IZS Specifications

General

Brand	HIKVISION
Model	DS-2CD2786G2-IZS
Category	Security Camera
Language	English