Network Camera User Manual
75
4. Click Save to save and finish the settings.
Note:
To lower the risk of information leakage, you are suggested to enable SNMP v3 instead
of SNMP v1 or v2.
7.2.2 Configuring FTP Settings
Purpose:
You can configure the FTP/SFTP server related information to enable the uploading of
the captured pictures to the FTP/SFTP server. The captured pictures can be triggered
by events or a timing snapshot task.
Steps:
1. Enter the FTP Settings interface: Configuration > Network > Advanced Settings >
FTP.
FTP Settings
2. Select the FTP protocol.
3. Input the server address and port.
4. Configure the FTP/SFTP settings; and the user name and password are required
for the server login.
To Next Page
Loading...
