HIKVISION DS-2CD2942F-I User Manual

User Manual of Network Fisheye Camera
11
Figure 2-3 SADP Interface
2.2 Setting the Network Camera over the WAN
Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.
2.2.1 Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.
 Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.

HIKVISION DS-2CD2942F-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2942F-I
Category	Security Camera
Language	English