User Manual of Network Fisheye Camera
95
9.11 Fisheye Parameters
Steps:
1. Enter Fisheye Parameters interface:
Configuration> Advanced Configuration> System > Fisheye Parameters
2. Select the mounting type of the fisheye camera according to your actual
environment and demand. Ceiling mounting, table mounting, and wall mounting
are selectable for the mounting type.
For example, if the fisheye camera is mounted on the ceiling, here you should
select Ceiling as the mounting type.
3. Click Save to save the settings.
Figure 9-19 Fisheye Parameters
To Next Page
Loading...
Need help?
General
