2) Edit the modifiable network parameters, e.g. IP address and port number.
3) Enter the password of the admin account of the device in the Password field and click
to save the changes.
Figure 2-3 Select a Device
Figure 2-4 Modify Network Parameters
3. You can enter the IP address of network camera in the address field of the web browser to view
the live video.
Note:
The default value of the IP address is “192.0.0.64”. The default user name is “admin”, and
password is “12345”.
For accessing the network camera from different subnets, please set the gateway for the
network camera after you log in.
To Next Page
Loading...
