Use a power adapter provided by qualified manufacturers. It is
recommended to provide an independent power adapter for each
device as adapter overload may cause over-heating or a fire hazard.
System Security
Please understand that you have the responsibility to configure all
the passwords and other security settings about the device, and
keep your user name and password.
Maintenance
If the product does not work properly, please contact your dealer or
the nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
To ensure explosion-proof performance, do not damage
explosion-proof surface.
Ambient temperature: -40°C to 60°C
DO NOT OPEN WHEN ENERGIZED.
POTENTIAL ELECTROSTATIC CHARGING HAZARD – SEE
INSTRUCTIONS.
When assembly and operation, the operator must follow the
requirements of the IEC 60079-14: latest version Explosive
atmospheres- Part 14: Electrical installations design, selection and
erection, beside of the manufacturer’s operating instructions or its
National equivalent.
To Next Page
Loading...
Need help?
General
