2 Installation
Before you start:
Make sure the device in the package is in good condition and all
the assembly parts are included.
Make sure your power supply matches with your camera. Refer
to specification for standard power supply of different camera
models.
Make sure all the related equipment is power-off during the
installation.
Check the specification of the products for the installation
environment.
Make sure that the wall is strong enough to withstand eight
times the weight of the camera and the bracket.
Note:
Do not drag the camera with its waterproof cables as the figure
below. Otherwise the waterproof performance is affected.
Figure 2-1 Do Not Drag the Cables
To Next Page
Loading...
Need help?
General
