4. Confirm the password.
5. Click OK to activate the camera and enter the live view interface.
3.2.2 Activation via SADP Software
SADP software is used for detecting the online device, activating the
camera, and resetting the password.
Get the SADP software from the supplied disk or the official website,
and install the SADP according to the prompts.
Follow the steps to activate the camera.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the
inactive device.
Figure 3-4 SADP Interface
Note:
The SADP software supports activating the camera in batch. Refer to
user manual of SADP software for details.
To Next Page
Loading...
Need help?
General
